Fabricação de eco-composito com a fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. The fibers were characterized and made matting (non-woven). The phases of the project were consisted to develop methods and to convert these fibers (booster) blended with polyester resin (matrix) in different proportions (10%, 20% and 30%) at the composite. Were studied fiber characteristics, mechanical properties of the composites, water absorption and scanning electron microscopy. Initially, the fibers were treated with solution of sodium hydroxide of 0.05 mols, and then taken to matting preparing at the textile engineering laboratory - UFRN. The composites were made by compression molding, using an orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as initiator (catalyst). To evaluate the mechanical tests (tensile and flexural) and water absorption were made twelve specimens with dimensions 150x25x3 mm were cut randomly. According to the standard method, tensile tests (ASTM 3039) bending tests (ASTM D790) were performed at the mechanical testing of metals at laboratory UFRN. The results of these tests showed that the composite reinforced with 30% had a better behavior when exposed to tension charge; while on the three points bending test showed that the composite reinforced with 10% had a better behavior. In the water absorption test it was possible to see that the highest absorption happened on the composite reinforced with 30%. In the micrographs, it was possible to see the regions of rupture and behavior of the composite (booster / matrix)

Estruturas secretoras de mucilagem em Hibiscus pernambucensis Arruda (Malvaceae): distribuição, caracterização morfoanatômica e histoquímica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento e caracterização de um eco-compósito de poliuretano de mamona e fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. Project phases consisted on the initial treatment of fibers with alkaline solution (NaOH) at 0.05 mols for removal of impurities, developing methods to convert these fibers (reinforcement) blended with castor oil polyurethane (matrix) in eco-composite with different proportions (5%, 10%, 15% and 20%). Fiber properties were evaluated by analysis of SEM, XRD and FTIR. The composites were produced by compression molding with dimensions 30x30x1cm. For characterization of the composites the following tests were performed: mechanical (tensile, compression, shore hardness A) according the standards and testing water absorption, moisture regain and biodegradation. The analysis of thermal properties on fibers and composites were by TG, DSC, thermal conductivity, resistivity, heat capacity and thermal resistance. Analyzing the results of these tests, it was observed that the composite reinforced with 20% showed a better thermal performance between others composites and dimensional stability when compared to commercial thermal insulation. Also is possible to observe a balance in moisture absorption of the composite being shown with its higher absorption rate in this same sample (20%). The micrographs show the fiber interaction regions with polyurethane to fill the empty spaces. In hardness and compression testing can identify that with increasing percentage of the fiber material acquires a greater stiffness by making a higher voltage is used for forming necessary. So by the tests performed in eco-composites, the highest percentage of fiber used as reinforcement in their composition obtained a better performance compared to the remaining eco-composites, reaching values very close to the PU.

Avaliação da degradação fotoquímica de corante alimentício e lixiviação de corantes têxteis de fibras de algodão expostos a suor sintético por método cromatográficos

Pós-graduação em Química - IQ

Desenvolvimento de têxteis técnicos para reforço de compósitos poliméricos

Materials denominated technical textiles can be defined as structures designed and developed with function to fulfill specific functional requirements of various industrial sectors as are the cases of the automotive and aerospace industries. In this aspect the technical textiles are distinguished from conventional textile materials, in which the aesthetic and of comfort needs are of primordial importance. Based on these considerations, the subject of this dissertation was established having as its main focus the study of development of textile structures from aramid and glass fibers and acting in order to develop the manufacture of composite materials that combine properties of two different structures, manufactured in an identical operation, where each structure contributes to improving the properties of the resulting composite material. Therefore were created in laboratory scale, textile structures with low weight and different composition: aramid (100%), glass (100%) and aramid /glass (65/35%), in order to use them as a reinforcing element in composite materials with polyester matrix. These composites were tested in tension and its fracture surface, evaluated by MEV. Based on the analysis of mechanical properties of the developed composites, the efficiency of the structures prepared as reinforcing element were testified by reason of that the resistance values of the composites are far superior to the polyester matrix. It was also observed that hybridization in tissue structure was efficient, since the best results obtained were for hybrid composites, where strength to the rupture was similar to the steel 1020, reaching values on the order of 340 MPa

Utilização de microemulsão na remoção da cor de efluentes têxteis contendo corantes dispersos

Polyester fibers are the most used fibers in the world and disperse dyes are used for dyeing these fibers. After dyeing, the colorful dyebath is discharged into effluent streams, which needs a special treatment for color removal. Surfactants interaction with dyes has been evaluated in several studies, including the textile area, specifically in the separation of dyes from textile wastewater. In this work a cationic surfactant was used in a microemulsion system for the extraction of anionic dyes (disperses dyes) from textile wastewater. These microemulsion system was composed by dodecylamonium chloride (surfactant), kerosene oil (organic phase), isoamyl alcohol (cosurfactant) and the wastewater (aqueous phase). The wastewater that results after the dyeing process is acid (pH 5). It was observed that changing the pH value to above 12.8 the extraction could be made, resulting in an aqueous phase with low color level. The Scheffé net experimental design was used for the extraction process optimization, and the obtained results were evaluated using the program "Statistica 7.0". The optimal microemulsion system was composed by 59.8wt.% of wastewater, 30.1wt.% of kerosene, 3.37wt.% of surfactant and 6.73wt.% of cosurfactant, providing extraction upper than 96%. A mix of reactive dyebath (50%) and disperse dyebath (50%) was used as aqueous phase and it presented extraction upper than 98%. The water phase after extraction process can be reused in a new dyeing, being obtained satisfactory results, according to the limits established by textile industry for a good dyeing. Tests were accomplished seeking to study the influence of salt addition and temperature. An experimental design was used for this purpose, which showed that the extraction doesn't depend on those factors. In this way, the removal of color from textile wastewater by microemulsion is a viable technique (that does not depend of external factors such as salinity and temperature), being obtained good extraction results even with in wastewater mixtures

Vestuário de proteção, materiais têxteis e conforto térmico: uma análise com aplicadores de agrotóxico, EPI e ambiente agrícola

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Detecção e quantificação de corantes de importância ambiental empregando sensores químicos baseados em fibras ópticas e polímeros molecularmente impressos

Pós-graduação em Química - IQ

Desenvolvimento de um material têxtil termosenssível com micro/nanocápsulas imobilizadas em fibras regeneradas

Intelligent and functional Textile Materials have been widely developed and researched with the purpose of being used in several areas of science and technology. These fibrous materials require different chemical and physical properties to obtain a multifunctional material. With the advent of nanotechnology, the techniques developed, being used as essential tools to characterize these new materials qualitatively. Lately the application of micro and nanomaterials in textile substrates has been the objective of many studies, but many of these nanomaterials have not been optimized for their application, which has resulted in increased costs and environmental pollution, because there is still no satisfactory effluent treatment available for these nanomaterials. Soybean fiber has low adsorption for thermosensitive micro and nanocapsules due to their incompatibility of their surface charges. For this reason, in this work initially chitosan was synthesized to functionalise soybean fibres. Chitosan is a natural polyelectrolyte with a high density of positive charges, these fibres have negative charges as well as the micro/nanocápsules, for this reason the chitosan acts as auxiliary agent to cationize in order to fix the thermosensitive microcapsules in the textile substrate. Polyelectrolyte was characterized using particle size analyses and the measurement of zeta potential. For the morphological analysis scanning Electron Microscopy (SEM) and x-Ray Diffraction (XRD) and to study the thermal properties, thermogravimetric analysis (TGA), Differential Scanning Calorimetry (DSC), Near Infrared Spectroscopy analysis in the Region of the Fourier Transform Infrared (FTIR), colourimetry using UV-VIS spectrum were simultaneously performed on the substrate. From the measurement of zeta potential and in the determination of the particle size, stability of electrostatic chitosan was observed around 31.55mV and 291.0 nm respectively. The result obtained with (GD) for chitosan extracted from shrimp was 70 %, which according to the literature survey can be considered as chitosan. To optimize the dyeing process a statistical software, Design expert was used. The surface functionalisation of textile substrate with 2% chitosan showed the best result of K/S, being the parameter used for the experimental design, in which this showed the best response of dyeing absorbance in the range of 2.624. It was noted that soy knitting dyed with the thermosensitive micro andnanocapsules property showed excellent washing solidity, which was observed after 25 home washes, and significant K/S values.

Optimización del Uso de Hormigones Autocompactantes Reforzados con Fibras de Acero en Aplicaciones Convencionales de Resistencias Moderadas

El objetivo de la presente tesis doctoral, se centra en plantear las posibilidades estructurales de fibras cortas de acero como refuerzo de la matriz de hormigón, habitualmente denominado HRFA, junto con la posibilidad de proporcionarle propiedades autocompactantes, que mejoren ciertos aspectos del material, formando el denominado Hormigón Autocompactante Reforzado con Fibras de Acero (HACRFA), en determinadas condiciones, gracias a las propiedades y características que se han atestiguado en este documento. Para tal fin y a diferencia de la mayoría de las experiencias anteriores que conocemos, se construye y analiza un tramo de muro de gran envergadura (3 metros de alto y 6 metros de largo). Este planteamiento permite estudiar la disposición de las fibras de acero dentro de un elemento estructural de gran tamaño y ejecutado en condiciones reales de obra, para determinar el comportamiento del material teniendo en cuenta todos los condicionantes posibles, algunos de los cuales no están presentes en las investigaciones de laboratorio. La exhaustiva caracterización del material que compone la estructura, conlleva la división del muro en 380 probetas de diversos tamaños que se someten a prometedores ensayos no destructivos y a los habituales ensayos destructivos. Las correlaciones establecidas entre ambos campos, posibilitan la determinación de aspectos resistentes de forma indirecta y sin dañar el material, estableciendo nuevas vías para un interesante control de calidad sobre la propia estructura. Para complementar el análisis a posteriori, se establece una metodología para determinar de manera previa a la ejecución de los trabajos la orientación de las fibras dentro de la masa de hormigón. Las simulaciones realizadas por medio de la Dinámica Computacional de Fluídos, permiten además establecer una serie de estimaciones de las resistencias residuales del material a partir de la orientación de las fibras prevista, detectando a priori puntos débiles o inadecuados procesos de hormigonado. Como colofón se realiza una comparativa económica y sostenibilidad medioambiental entre la aplicación a depósitos de contención cilíndricos propuesta, ejecutada por un lado mediante un hormigón convencional y el HACRFA por el otro. Cada sistema presenta sus ventajas y desventajas pero se concluye que el HACRFA puede resultar igual o más económico y sostenible, que un diseño estructural convencional. Estos trabajos se enmarcan dentro de las investigaciones desarrolladas por el Área de Conocimiento de Ingeniería de la Construcción adscrito al Departamento de Ingeniería Mecánica de la Universidad del País Vasco / Euskal Herriko Unibertsitatea (UPV/EHU).

Análisis de la influencia de la orientación de las fibras metálicas en la resistencia de la matriz de hormigón de acuerdo al Ensayo Barcelona

[ES]El objetivo de este trabajo de fin de grado es analizar la influencia que tiene la cuantía y orientación de fibras metálicas presentes en el interior de probetas de hormigón autocompactante y cuyo objetivo es reforzar y aumentar la resistencia a tracción de este material. Se expondrán las propiedades que combina el HACRFA gracias a la autocompactación del hormigón y la inclusión de fibras en su interior y los beneficios que este nuevo material aporta. Por otro lado, se tratara de situar este estudio en un contexto, analizando a la vez cuál es el alcance y los objetivos más importantes que se han tenido en cuenta. A continuación, y a modo de complementación de su contexto, este trabajo tiene un estado del arte, en el que se mencionarán métodos y ensayos necesarios para llegar a un resultado que permita predecir cuál será la resistencia del material, y por tanto su tenacidad o capacidad de absorber energía, sin necesidad de emplear más que un método fácil y rápido, obviando el resto de ensayos destructivos utilizados en este trabajo. Para tal fin, se establece una metodología que, gracias a ensayos de laboratorio, permita establecer una relación entre el método sencillo que se ha mencionado, el método inductivo, y un resultado teórico de la tenacidad que presenta el HACRFA. Se observará cómo la desviación entre los ensayos experimentales y los resultados teóricos obtenidos es prácticamente nula, despreciando situaciones en las que se presenten comportamientos muy diferentes debido a fallos durante los ensayos.

Estudo da enzima Horseradish peroxidase (HRP) no descoramento dos corantes têxteis Azul Drimaren X-3LR, Azul Drimaren X-BLN, Rubinol Drimaren X-3LR e Azul Drimaren CL-R

O presente trabalho avaliou o potencial da enzima HRP no descoramento dos corantes têxteis: Azul Drimaren X-3LR (DMBLR), Azul Drimaren X-BLN (DMBBLN), Rubinol Drimaren X-3LR (DMR) e Azul Drimaren CL-R (RBBR). Parâmetros como concentração do corante, temperatura, concentração de peróxido de hidrogênio (H2O2) e tempo de reação foram otimizados. Os ensaios de descoramento dos corantes foram realizados a partir desses resultados. As melhores condições reacionais determinadas para os corantes estudados foram: concentração do corante = 120 mg L-1, temperatura = 35C, concentração de H2O2 = 0,55 mM e tempo de reação = 1 hora. Os percentuais de descoramento dos corantes DMBLR, DMBBLN, DMR e RBBR, após o tratamento enzimático foi de 99, 77, 94 e 97%, respectivamente. O tempo reacional de 5 minutos foi suficiente para os corantes DMBLR e RBBR apresentarem elevada porcentagem de descoramento, 96% para ambos. Já os corantes DMBBLN e DMR só apresentaram elevado grau de descoramento após 1 hora de reação, sendo o corante DMBBLN o mais recalcitrante, apresentando uma melhora de 10% na porcentagem de descoramento, após 24 horas de reação. Além do grau de descoramento, também foi avaliada a toxicidade dos corantes antes e após o tratamento enzimático utilizando Daphnia pulex e Artemia salina como bioindicadores de toxicidade. Resultados toxicológicos utilizando Daphnia pulex não foram conclusivos, indicando que esse bioindicador não foi adequado para avaliar a toxicidade dos corantes estudados no meio reacional utilizado. Com o uso da Artemia salina na avaliação toxicológica foi observado uma redução da toxicidade para os corantes DMBLR, DMR e RBBR após tratamento enzimático, e um aumento da toxicidade não significativo para o corante DMBBLN. Os resultados obtidos no trabalho ressaltam a eficiência da enzima HRP no descoramento dos corantes têxteis estudados, sem a geração de produtos tóxicos e prejudiciais ao meio ambiente

Caracterização de concreto reforçado com fibras pela técnica de microtomografia computadorizada por transmissão de raios X

Nesta dissertação de Mestrado do programa de Pós-Graduação em Ciência e Tecnologia dos Materiais é apresentado um estudo para a caracterização do concreto reforçado com fibras de polipropileno e de aço pela análise das imagens de microtomografia computadorizada por transmissão de raios X (μCT). Foram produzidos corpos de prova de concreto para determinar a sua resistência mecânica à compressão. As imagens foram obtidas no sistema Skyscan, modelo 1174, reconstruídas e analisadas. Foi possível observar na análise das imagens a estrutura da fibra de aço dispersa na matriz do concreto e quantificá-las pelo programa de análise de imagens Ctan e perceber um ganho na resistência mecânica em relação ao concreto sem fibras. Não foi feito a quantificação das amostras de fibras de polipropileno dispersas na matriz de concreto, mas foi observada a presença de aglomerados dessa fibra que resultaram na perda da resistência mecânica em relação ao concreto sem fibras.

Paper Art. Fibras papeleras en la Creación Artística. Producción y Edición

Nivel educativo: Grado. Duración (en horas): De 21 a 30 horas

Estudios de formación de fibras amiloides de lisozima por espectroscopia de infrarrojo: efecto de los flavonoides

Se ha estudiado la formación de fibras amiloides de lisozima, a pH básico. Se ha analizado también el efecto de los flavonoides, morina y quercetina, en la formación de esas fibras amiloides.